How to Use 1.Fill the beaker with an appropriate amount of water and then dry the water onits surface. 2.Snap the hook attached to the filter cloth onto the top seat glass jar. 3.Place the top holder on the flask at an angle. 4.When the water in the flask is 95C°, press the upper holder glass flaskdownward. When the water rises to the top seat, pour the coffee powder down andstir. 5.Stir once after 20 seconds, then again after 30 seconds. 6.After 5 seconds, remove the alcohol lamp and pour out the water from the beakerwhile removing the top holder. Then put the coffee from the top seat back intothe beaker. 7.After the coffee flows down the beaker, there will be a lot of coffee oil(yellow). At this point, remove the top holder again. 8.Finish the cup of aromatic coffee. Specification Material:Borosilicate Glass, Stainless Steel, Flannel Product Size: 13*9.5*37.5cm/5.12*3.74*14.76in Package Size: 40*18.5*16cm/15.74*7.28*6.29in Net Weight:0.9kg/1.98lbs Gross Weight: 1.19kg/2.62lbs Volume:500ml/0.13gal Temperature Resistance Range: -10-280C° Package Included 1*SiphonCoffee Pot 1*MeasuringSpoon 1*StirringRod 1*EnglishManual Notes 1.Please allow the slight color difference caused bythe shooting light and 1-3cm error due to manual measurement. Please make sureyou do not mind before you order. 2.This product contains alcohol lamps (withoutalcohol) alcohol needs to be purchased by yourself, you can buy it in majorpharmacies or fully qualified s. Recommend the use of 95 degrees ofmedical alcohol. 3.Please be aware that you can not add alcohol whenburning alcohol. The amount of alcohol should not exceed 2/3 of its volume, andnot too little. 4.It is strictly forbidden to use a burning alcohollamp to ignite and heat the substance with the outgrowth of alcohol. 5.Extinguish the alcohol lamp with a cap, the lampshould be covered diagonally. 6.Please cover the lamp cap when not using thealcohol lamp to avoid alcohol evaporation.